Coconut shell charcoal, which is the product of the carbonization process of coconut shells, is increasingly sought after in various industries due to its superior quality and environmental friendliness. With the continuously growing demand, this charcoal has become a primary choice for various applications, ranging from household fuel to the production of activated carbon for air and water filtration. However, to ensure its optimal use, it is important for us to understand the coconut shell charcoal specifications, such as ash content, calorific value, and particle size, each of which affects its efficiency in different industries.
Coconut Shell Charcoal Specifications
To ensure optimal quality, understanding coconut shell charcoal specifications is crucial. Each element in the charcoal production process, from moisture content to calorific value, plays a role in determining its efficiency and utility in various applications.
Below is a complete explanation of the technical specifications of coconut shell charcoal briquettes:
Moisture Content
The moisture content in coconut shell charcoal is one of the key factors affecting the quality of combustion. Excessive moisture makes it difficult for the charcoal to burn efficiently and tends to produce more smoke.
Additionally, charcoal with high moisture content is more prone to rapid deterioration, as moisture can make the charcoal brittle and easily break apart. Therefore, high-quality coconut shell charcoal should have a moisture content below 10%, with an ideal range between 5-8% for more optimal combustion results.
Read Also: Raw Coconut Shell Charcoal – A Profitable Business Potential
Ash Content in Coconut Shell Charcoal
The ash content in coconut shell charcoal indicates the amount of residual material that remains unburned during the carbonization process. High ash content can reduce the quality of the charcoal because it tends to lower combustion efficiency and increase the residue left after burning.
Charcoal with low ash content, typically under 5%, is considered of higher quality because it contains more carbon available for combustion, thus generating more energy. Excessive ash can also cause problems in heating or combustion equipment, such as clogging channels and requiring more frequent maintenance.
On the other hand, low ash content is crucial for applications that demand high quality, such as the production of activated carbon or use in the metallurgical industry. In these processes, high ash content can interfere with the final product’s quality and reduce production efficiency. Therefore, it is important to select coconut shell charcoal with low ash content to ensure cleaner and more efficient combustion.
Fixed Carbon
Fixed carbon refers to the carbon that remains after most other substances, such as water and organic materials, have been burned off during the charcoal production process. A high fixed carbon content indicates that the charcoal has a longer burning time and is more efficient. Fixed carbon is crucial in determining the strength and quality of charcoal combustion.
Ideally, high-quality coconut shell charcoal should have a fixed carbon content of over 70%, with higher figures reflecting better quality. High fixed carbon ensures that the charcoal produces more consistent and longer-lasting heat, making it highly suitable for industrial applications like grills or as fuel in metallurgical processes. Therefore, it is important for manufacturers and users of charcoal to monitor fixed carbon levels as an indicator of the charcoal’s quality for various applications.
Volatile Matter
Volatile matter refers to the portion of coconut shell charcoal that evaporates when heated. It consists of water, gases, and other flammable chemicals, and can affect the combustion efficiency of charcoal. If the volatile matter content is too high in coconut shell charcoal, it can lead to unstable combustion and excessive smoke. Ideally, high-quality coconut shell charcoal should have a volatile matter content around 15-25%, which is sufficient to provide good combustion without causing issues during the burning process.
The optimal volatile matter content is important in various applications, such as heating or energy production. Too much volatile matter can lead to rapid and inefficient combustion, while too little can make the burning process too slow and insufficient in generating heat. Therefore, knowing the volatile matter content in charcoal is crucial to ensure its efficient and optimal use.
Particle Size and Shape
The size and shape of coconut shell charcoal particles greatly influence how the charcoal burns and its efficiency in use. Smaller charcoal pieces tend to burn faster because they have more surface area exposed to air, while larger pieces burn more slowly but with lower intensity. The shape of the particles also plays a significant role in combustion speed, as irregularly shaped or uneven particles can lead to uneven burning. Therefore, the size and shape of the charcoal particles should be chosen based on the specific application to achieve optimal combustion results.
In industries such as food grilling or heating, the size and shape of charcoal particles are critical to the efficiency and comfort of use. Coconut shell charcoal with appropriately sized and shaped particles for a given application ensures optimal performance.
Calorific Value in Coconut Shell Charcoal Specifications
Calorific value is a measure of the amount of energy that coconut shell charcoal can produce during combustion. A high calorific value indicates that the charcoal has the potential to generate more heat for a longer period, making it a more efficient choice for heating or industrial applications that require a stable energy source.
The calorific value of coconut shell charcoal typically ranges between 6,000 and 7,500 kcal/kg, depending on the quality of the raw material and the manufacturing process. Charcoal with a higher calorific value is more efficient at producing heat, thus reducing fuel consumption and operational costs.
A high calorific value is also crucial for energy production or industrial combustion applications, as it can reduce the amount of charcoal needed to reach a specific temperature, improve energy efficiency, and lower emissions. Therefore, ensuring that the coconut shell charcoal used has an appropriate calorific value is essential for achieving optimal and efficient combustion performance.
Read Also: Granulated Coconut Shell Charcoal for Eco-Friendly Filtration
Coconut Charcoal Briquette Production Center with the Right Composition
Choosing high-quality coconut charcoal briquettes with the right composition is an important decision for users. Using coconut charcoal briquettes in everyday life, such as for cooking, grilling, or smoking hookah, helps reduce unused waste and contributes to saving the planet from accumulating garbage.You can get the best quality coconut charcoal briquettes at affordable prices only at Little Briquette. Contact the admin number here to get affordable prices and international shipping.